181-2723-VT
LAPTORR Exhaust System GR Supra B58 Engine
Applicable Models
TOYOTA GR A90-SUPRA RZ B58 Engine
TOYOTA GR A91-SUPRA RZ B58 Engine
Features
Performance
Due to the characteristics of the B58 engine, while torque is very high from 2000-4000 The LAPTORR exhaust is designed as a performance muffler with low friction to promote turbine rotation and excel in the high rpm range.
LAPTORR exhaust is designed as a performance muffler with low friction to promote turbine rotation and excel in the high rpm range.
The exhaust pressure control is also taken into consideration, so you will not feel any loss of torque in the low and mid RPM range.
Sound quality is also important.
In Sport+ mode, the clear and pleasant exhaust sound at high rpm is very racy!
In Comfort mode, the simple construction of the engine reduces the "muffled" sound.
Volume
In Sport+ mode, the volume is set to the best sport volume/sound quality that can be heard from the driver's seat when the accelerator pedal is fully opened. The volume you hear outside may be a little loud due to the high sound insulation inside the supra interior.
The exhaust burble sound in bootmod3, etc. will be more than loud enough so that you can have a wide range of adjustment, making it easier to match the volume/sound quality to your preference.
In comfort mode, the volume is loud enough to have a conversation inside the room due to the characteristics of the B58 engine when driving at a constant speed without acceleration.
 
Layout/Installation
・The layout is from the rear of the downpipe to the end.
 The connection to the downpipe can be installed without any modification.
 The stock diffuser can be installed without modification.
 The stock actuator is used, so the exhaust flap works the same as the stock.
 
Components
・Front Pipe Dorpipe x1
・Middle Pipe x1
・Rear Silencer x1
・Clamp Band x2
・Flange Gasket x1
・Flange Mounting Bolt / Nut
Material properties
 Main pipe: SUS436 stainless steel
 Silencer: SUS304 stainless steel
 Finisher: Titanium / Φ105mm x 2 (anodized purple finish)
Weight:
12.2kg, lighter than most of stainless steel exhaust on market.
 
Other
 ・Competition use only
---------------------------------------------
Down pipe (sold separately)
- Catalyst-less/straight type
- For competition use
| SKU | 181-02723-VT |
| Brand | Laptorr |
Be The First To Review This Product!
Help other Mgrit Motorsport users shop smarter by writing reviews for products you have purchased.
More From This Category
Invidia R400 Cat Back Exhaust w/Ti Tips - Honda Civic Type-R FK8 17+
NOT CURRENTLY AVAILABLE - Please contact us for information
$1,699.00
Invidia G200 Cat Back Exhaust w/Ti Rolled Tip - Subaru Forester XT SG 03-08
NOT CURRENTLY AVAILABLE - Please contact us for information
$1,299.00
Invidia Q300 Cat Back Exhaust w/SS Tips - Ford Focus ST LW/LZ 11-18
NOT CURRENTLY AVAILABLE - Please contact us for information
$1,299.00
Akrapovic Slip-On System for Lamborghini LP 550 560 570-4 with Carbon Tips
NOT CURRENTLY AVAILABLE - Please contact us for information
$17,538.00
Invidia Q300 Cat Back Exhaust w/Ti Rolled Tips - Mitsubishi Evo X CZ4A
NOT CURRENTLY AVAILABLE - Please contact us for information
$1,399.00
Akrapovic Evolution Race Line (Titanium) Nissan GTR R35
NOT CURRENTLY AVAILABLE - Please contact us for information
$18,178.00
Invidia Q300 Cat Back Exhaust w/Ti Tips - Subaru WRX 11-14/STI 08-14 (Hatch)
NOT CURRENTLY AVAILABLE - Please contact us for information
$1,799.00